Alguns / Todos os MP3s não tocam

O MediaMonkey 3.x e 4.x incluem plugins de MP3 (in_dsmp3.dll e in_wmp3.dll respectivamente) que permitem que o MediaMonkey use o codec MP3 do Windows para reproduzir arquivos MP3. Embora isso normalmente funcione sem problemas, há vários casos em que a reprodução de MP3 pode falhar:

  1. Arquivos MP3 com CRCs ruins ou arquivos danificados de outra forma. Em tais casos, você pode tentar usar um plugin MP3 alternativo como:
    in_mad.dll: Este plug-in é um plug-in excelente, especialmente se você tiver uma placa de áudio com capacidade para resolução de áudio de 24 bits+, mas o desenvolvimento deste plug-in não está mais ativo. Ele também pode ser obtido por meio da página MediaMonkey Input Plug-ins:
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll: Este plug-in é considerado um plug-in de alta qualidade, e as incompatibilidades de streaming com o MediaMonkey foram resolvidas; no entanto, ele não é mais desenvolvido ativamente.
    Pode ser encontrado em: http://otachan.com/in_!mpg123.html

    Se você substituir os plug-ins de entrada MP3 padrão por qualquer um dos acima, certifique-se de remover ou desabilitar os plug-ins atuais (por exemplo, altere in_wmp3.dll para in_wmp3.dll.off).

    Observação: se você quiser verificar se um MP3 está danificado e/ou consertá-lo, as seguintes ferramentas de terceiros podem ser úteis:
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Os arquivos têm uma extensão incorreta. Por exemplo, arquivos mp2 às vezes recebem incorretamente uma extensão mp3. Para esses arquivos, você deve alterar a extensão para mp2 e instalar o codec mp2:
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. Se você tiver uma versão do Windows que não vem com o Windows Media Player e Codecs válidos, nenhum arquivo de áudio será reproduzido. Para resolver, você precisará instalar os codecs ausentes .
  4. Se o Windows Media Foundation e o Audio System Services foram corrompidos (isso foi observado em algumas atualizações para o Windows 10), todos os arquivos de áudio não serão reproduzidos. Para corrigir isso: a) Usando o REGEDIT, verifique se a chave “KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\” “DependOnService” contém apenas “AudioEndpointBuilder RpcSs” e _não_ contém uma linha com “MMCSS”. Se contiver, exclua-a e reinicie o sistema b) No prompt de comando, use o comando “sfc /scannow” para corrigir os serviços “Windows Audio” e “Windows Audio Enpoint Builder” se estiverem ausentes ou tiverem configurações corrompidas. c) Reinstale o driver da placa de som. Desinstale o existente -> Reinicie o sistema -> Deixe o Windows instalar o padrão ou instale o mais recente do fabricante do chipset da placa de som (Realtek, C-Media, Connexant, …)
  5. Em alguns casos, também pode ser que codecs estejam instalados, mas que estejam mal configurados. Aqui está um link para um breve tutorial sobre como consertar codecs do Windows: http://www.looprecorder.de/tut_l3codec.php

Aplica-se a:

Translated automatically (see original)

Some / All MP3s Don’t Play

MediaMonkey 3.x and 4.x include MP3 plugins (in_dsmp3.dll and in_wmp3.dll respectively) that allow MediaMonkey to use Windows’ MP3 codec to play MP3 files. Although this normally works without a problem, there are several cases in which MP3 playback can fail:

  1. MP3 files with bad CRCs or otherwise damaged files. In such cases, you can try using an alternative MP3 plugin such as:
    in_mad.dll: This plug-in is an excellent plug-in especially if you have an audio card capable of 24-bit+ audio resolution, but development of this plug-in is no longer active. It can also be obtained via the MediaMonkey Input Plug-ins page:
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll: This plug-in is considered to be a high-quality plug-in, and streaming incompatibilities with MediaMonkey have been resolved, however, it is no longer actively developed.
    It can be found at: http://otachan.com/in_!mpg123.html

    If you replace the default MP3 Input-Plug-ins with either of the above, make certain to remove or disable the current plug-ins (e.g. change in_wmp3.dll to in_wmp3.dll.off).

    Note: If you want to verify whether an MP3 is damaged, and/or fix them, the following third party tools may be helpful:
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Files have an incorrect extension. For example, mp2 files are sometimes incorrectly assigned an mp3 extension. For such files, you should change the extension to mp2 and install the mp2 codec:
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. If you have a version of Windows that doesn’t come with Windows Media Player and valid Codecs, then no audio files will play. To resolve, you’ll need to install the missing codecs.
  4. If Windows Media Foundation and Audio System Services have been corrupted (this has been observed on some upgrades to Windows 10), then all audio files will fail to play. To fix this: a) Using REGEDIT, verify that “KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\” Key “DependOnService” contains only “AudioEndpointBuilder RpcSs” and does _not_ contain a line with “MMCSS”. If it does, delete it and restart the system b) From the command prompt, use the “sfc /scannow” command to fix both “Windows Audio” and “Windows Audio Enpoint Builder” services if they are missing or have corrupted settings. c) Reinstall the Sound card driver. Uninstall existing -> Restart System -> Let Windows install default or install latest one from sound card chipset manufacturer (Realtek, C-Media, Connexant, …)
  5. In some cases, it may also be that codecs are installed, but that they are misconfigured. Here is a link to a brief tutorial re. fixing Windows Codecs: http://www.looprecorder.de/tut_l3codec.php

Applies to:

Hide original

Este artigo foi útil?